NO SHIPPING COST When Picked
up at Distribution Centers ~ Products Can Be Shipped to any Business or Residence
~ APO / FPO
The introduction
of the World’s First Synthetic motor oil to meet American Petroleum Institute service requirements in 1972 set all-new
standards for motor oil quality. AMSOIL synthetic motor oil outperformed conventional petroleum motor oils on all counts.
It was clear from the start that this innovative product would play a major role in engine performance and engine life.
AMSOIL has remained steadfast
in its commitment to quality and precision lubricant engineering, leading the charge over the past four decades with many
industry firsts. This quality-first commitment has driven the introduction of numerous synthetic lubricants, premium filtration
technologies and fuel additives that provide tangible, real-world value.
Today, virtually every other
motor oil manufacturer has recognized the superiority of synthetic lubricants and has followed the AMSOIL lead with introductions
of synthetic motor oils of their own. They spend millions of dollars advertising their “new” and “revolutionary”
products. No one, however, can match AMSOIL experience and technological know-how. And no one delivers products like AMSOIL.
Accept no substitutes –
Retail and Commercial – Request for information to
sell AMSOIL or purchase AMSOIL products for commercial use.
AMSOIL
has a documented history of innovation and leadership.
First to develop an
approved API-Rated 100 Percent Synthetic motor oil in 1972.
First
to introduce "Extended Drain Intervals" with a recommended 25,000-mile/12 month drain interval.
First to produce synthetic motor
oils for Diesel Engines.
First to Produce Synthetic
Motor Oil for Racing Engines.
First to Produce
Synthetic Motor Oil for Turbo Engines.
First to
Produce Synthetic Motor Oil for Marine Engines.
First
to introduce synthetic oils that legitimately contribute to improving fuel efficiency.
First to manufacture synthetic gear lube for automotive use.
First to manufacture a 100:1 pre-mix synthetic 2-cycle oil.
First to manufacture a synthetic
automatic transmission fluid for automotive use.
First
to manufacture a Full Synthetic Cartridge style Oil Filter
AMSOIL Synthetic Lubricants
are the industry benchmark in lubrication technology. Engineered with the world’s finest synthetic base oils and high
performance additives designed for those who demand the absolute best in Lubricant performance. The exclusive “Extended
drain” and “OEM” formulations deliver superior protection, maximum fuel economy and
exceed the requirements of modern, high performance and older engines.
AMSOIL, the leader in automotive synthetic
lubrication, produced the world’s first API qualified synthetic motor oil in 1972. Trust the extensive experience of
AMSOILThe First in Synthetics® to do the best job protecting your engine.
Engineered
to outperform all conventional motor oils. Reduces heat, friction, and wear for maximum performance and fuel efficiency. Clean
engine formula resists high-temp breakdown that forms sludge and varnish. Lasts longer and offers better protection.
Better Fuel Economy
Fuel economy is becoming more important with each passing year. Gas and diesel prices keep rising, putting
a major strain on businesses that rely on vehicles and heavy equipment in their daily operations. AMSOIL synthetic lubricants
improve fuel economy by allowing moving parts to move more freely, using less energy and creating less friction than when
conventional lubricants are used.
Proven Cost Savings using AMSOIL - Results May
Vary
First API Approved 100 % Full Synthetic Oil –
Approved in 1972
Extended
drain intervals of 5 to 7 times than that of conventional oils - service life of engine oils - 25,000
miles or 1 year life.
Better
Mileage - By using Engine Oils alone will increase mileage 1% to 3 %
Reduced Emissions - Thermally Stable, strong resistance to high
temperature volatility (burn-off) preventing sludge deposits and keeping engines clean
Less Oil Used or Burned - Low volatility and clean operation reduce
oil consumption and emissions.
All product lines
are designed for longer service life saving operating costs - Fewer plastic containers and filters
to dispose of.
Fuel Savings Using 5W-40 diesel
Oil - fuel savings of $ 950.00 or more per truck a year shown in shear stability document on diesel
oil page.
8 % -10% fuel savings
with Amsoil products through entire vehicle in engine, transmission etc.
Diesel oil -Pre 2007 diesels - 3 x OEM drain intervals or more with oil analysis.
Diesel oil change interval based on hours
with refuse hauler - 983 hours with Amsoil, was 239 hours with conventional oil.
Gas engine oils - 1% - 3 % fuel savings due to reduced engine
drag.
Hydraulic oil - Less
fuel used, 6 % -15 % productivity increase - more at hydraulic oil page on website
Hydraulic Oil – MEHF Antiwear, increased equipment life
and better performance in extreme temperature ranges.
Compressor
oil - 8000 hour service life, 6% electric reduction - more at compressor oil page on website
Gear oils - Longer life, mileage increase
due to reduced drag. 500,000 mile OTR.
Grease
- Off road grease last 50% longer, resists pound out and less grease dropped on the land - more at grease page.
Grease - Truck-chassis-equipment grease
- engineered for extended service life and less grease dropped on roads - more at grease page.
Figures dont include Vehicle Downtime, Personal Time getting vehicle to shop
or Performing change on Own and filter disposal fee.
NOTE: The Amsoil cost per quart is just an example and not the actual price which is less as a customer buying at
wholesale.
More Reasons to Safely Extend Drain Intervals with Amsoil Lubricants
According to one report, the true cost of an oil change can exceed 40 times the cost of the
oil itself. In fact, there are many hidden costs and unknown risks that are encountered during relubrication that must be
considered. Let’s look at some of the risks in doing a simple oil change:
Introducing a wrong, mixed or incompatible oil
Introducing a contaminated oil
Introducing a lubricant that degraded in storage (severe additive stratification is a common example)
Introducing a defective oil (blend or formulation related)
Disturbing sediment and sludge during the oil change (this is
known as the fish bowl effect and can lead to subsequent oil-way blockage and starvation)
Dislodging sludge and deposits, causing leakage (disturbed oil clotting)
Dry restarts, dirty oil restarts (before filter can restore
cleanliness)
Human agency failures during
or directly after an oil change (over-charging, under-charging, failure to open/close valves, dead-heading pumps,
etc.)
When you look collectively at the true cost of an oil change and
the associated risks, there is an abundance of financial and business motivation to maximize, or at least optimize, the oil
change interval. When well implemented, this can translate to sharply reduced oil consumption, lower maintenance costs and
greater machine reliability.
No other Lubricant Manufacturer in the World matches the High Quality standards
set by AMSOIL, and all AMSOIL Synthetic Lubricants EXCEED the industry’s most stringent specifications
by a wide margin
