AMSOIL IS DANA EATON APPROVED - Eaton Requires
a Synthetic to extend drain interval warranty plan
Amsoil 260 SAE 50 Synthetic Transmission Fluid
- Transmission
Amsoil 115 SAE 75W-90 Synthetic Gear Oil - Drive Axle
Amsoil 120 SAE 80W-140 Synthetic
Gear Lube - Drive Axle (Vocational)
NOTE: AMSOIL Synthetic Severe Gear Lubes do not require the use
of an additional additive. However, not all differentials respond the same
and if chatter is noticed, the addition of AMSOIL Slip Lock
will eliminate it.
For chattering
differentials not running AMSOIL Gear Lube, this product is
an excellent solution to the problem.
All Products Catalog - Includes Gear Lubes - View or Download - Click Here - May Take a Few Moments to Open
Universal Synthetic Marine Gear Lube SAE 75W/80W-90 (AGM)
High Performance lubricant engineered
to meet the demands of marine applications. AMSOIL Universal
Synthetic Marine Gear Lube provides:
AMSOIL Universal Synthetic
Marine Gear Lube is an exclusive AMSOIL formulation of
synthetic base oils and high performance additives that address the specific concerns
of marine applications. It is extreme pressure
(EP) additive fortified for superior protection of fast accelerating, high torque/horsepower
engines. It protects against shock loading from
cavitation of heavily loaded engines.
AMSOIL Universal
Synthetic Marine Gear Lube is water resistant. It maintains extreme
pressure protection even when contaminated with as much
as 10% water. It promotes longer seal life, preventing excessive water leakage. AMSOIL
Universal Synthetic Marine Gear Lube protects
against rust and is compatible with aluminum, copper and brass alloys.
APPLICATIONS
AMSOIL Universal Synthetic Marine Gear Lube is recommended for fresh and
salt water applications requiring either 75W-90
or 80W-90 viscosity grade and meeting either API GL-4 or GL-5 performance
standards.
- Lower Units - Sterndrives - V Drives - Bow and Tunnel Thrusters - Marine
Transmissions
AMSOIL SEVERE
GEAR® Synthetic Extreme Pressure (EP) Lubricants are premium
grade gear oils specifically engineered for maximum performance in severe duty applications.
These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear
stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL
SEVERE GEAR® Synthetic EP Lubricants maintain their viscosity for long-lasting protection
against metal-to-metal contact.
The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces,
providing the ultimate line of defense against wear, pitting and scoring. AMSOIL SEVERE
GEAR® lubricants help prevent “thermal runaway” — a phenomenon
caused by a lubricant’s inability to control friction and increased
heat under high-stress conditions. By controlling thermal runaway, AMSOIL SEVERE GEAR® Synthetic
EP Lubricants inhibit rapid lubricant degradation and component
damage. Equipment runs better and lasts longer with AMSOIL SEVERE GEAR® Synthetic EP Lubricants.
Performance
AMSOIL SEVERE GEAR® provides performance beyond that
possible with conventional gear oil. These AMSOIL custom products offer
superior gear and bearing protection, better friction and heat reduction, increased efficiency
and extended service life.
- Superior Film Strength
- Controls Thermal Runaway
- Rust and Corrosion protection
- Reduced Operating Temperatures
- Improved Efficiency
- Longer Oil, Seal, &
Equipment Life
Temperature Extremes
AMSOIL SEVERE GEAR® EP lubricants excel in hot and cold temperature
extremes. By design, they resist breakdown from high heat, preventing
acids and carbon/varnish formation. Their waxfree construction also improves cold
flow properties, improving fuel economy and cold weather shifting.
AMSOIL SEVERE GEAR® Extreme Pressure EP(75W-90) With Pour Point of - 58 F
Provides superior performance and replaces competitors’ 75W-90 and 80W-90 gear oils. It delivers
the best fuel efficiency and cold temperature performance of the SEVERE GEAR oils.
AMSOIL SEVERE GEAR® Extreme Pressure EP(75W-110) With Pour Point of-54 F
Provides superior performance and replaces competitors’ 75W-110,
75W- 90 and 80W-90 gear oils. It delivers better viscosity protection
than Severe Gear 75W-90 and better fuel efficiency than Severe Gear 75W-140.
AMSOIL
SEVERE GEAR® Extreme Pressure EP(75W-140) With Pour Point of -54F
Provides
superior performance and replaces competitors’ 75W-140, 80W-
140 and 85W-140 gear oils. Use where these viscosities are required by OEMs and where
maximum viscosity protection is needed for extreme severe-duty applications.
Synthetic Gear Lube SAE
80W-90(AGL) With Pour Point of - 43F
High quality replacement for applications specifying
SAE 80W-90 conventional gear lube. Synthetic construction provides
improved cold flow properties, high viscosity
index and heat resistance. Contains an over treat of high quality additives,
exceeding the minimum standards. Provides
excellent wear protection and long equipment life.
Long
Life Gear Lubes
AMSOIL Long Life Synthetic Gear Lubes are
extended drain gear lubes engineered specifically to last several times longer and protect
gears better than all conventional gear oils. These exclusive
AMSOIL formulations of premium synthetic base oils and high performance
additives resist acid, carbon and varnish formation from oxidative breakdown. Components
run cleaner and last longer. AMSOIL Long Life Synthetic Gear Lubes are shear
stable and friction reducing. They maintain their viscosity during
extended service for maximum wear control and they are fuel-efficient.
The superior cold temperature fluidity and high temperature stability properties of
AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment
lasts longer and maintenance costs are reduced with AMSOIL
Long Life Synthetic Gear Lubes.
Long Life Gear Oils 75W-90 (FGR) & 80W-140 (FGO)Pour Point of - 67 F and - 40 F
Specifically engineered for extended drain intervals up to 500,000
miles as set by equipment manufacturers for over-the-road trucks and heavy equipment. Provides long life in passenger cars
and trucks. Protects against wear and improves equipment life. Excellent "All Season" summer and winter performance.
Outperforms all conventional gear oils. Compatible with most limited-slip differentials.
Use AMSOIL Extended Drain Synthetic Gear oils
in differentials, manual transmissions or other gear applications.recommended for all domestic and foreign applications such
as over-the-road trucks, light, medium and heavyduty trucks, off-road equipment, commercial vehicles, motor
homes, autos,
SUVs, emergency vehicles, buses, delivery/utility vehicles and tractors.
Slip Lock™ Differential
Additive (ADA)View or Download Data Sheet - Click Here
Formulated with advanced
friction modifier. Designed to eliminate gear-housing chatter in
cars, trucks and SUVs equipped with limited-slip, posi-traction and
locking differentials. Formulated for use with both synthetic and petroleum gear
lubricants and safely replaces manufacturer-recommended
friction modifiers.
Commercial and Industrial - View or Save - Click Here
Industrial
Products Not in Catalog
Synthetic RC Series Oils are primarily recommended for gear
and bearing applications and circulatingsystems requiring R&O and/or anti-wear additive technology. RCE is a clear, non-staining
oil with an ISO-10 viscosity designed for high-speed spindles such as those found in textile applications.
The lighter
viscosity RC Series Oils (RCF, RCH) provide superior protection in high- and low-pressure gear, vane and piston hydraulic
systems, compressors, high speed bearings, small gear sets, pumps, high-speed spindles, high-speed gears and many other industrial
applications. Higher viscosity RC Series Oils, beginning with RCI (ISO 46), meet AGMA specifications for R&O and synthetic
gear oil specifications 1 through 8, respectively,
for the lubrication of intermediate-speed equipment where mild shock-loading
and intermittent service are involved. These applications include machine tools, roller chains, gear reducers, cone drives,
large motor bearings, medium-speed ball and roller bearings, blowers and worm gear sets.
SG Series Extreme Pressure Gear Oils - ISO 100 to
680
AMSOIL Synthetic SG Series Extreme Pressure Gear Oils are recommended
for industrial applications operating under heavy loads and shock conditions and specifying an extreme-pressure lubricant.
This includes, but is not limited to, enclosed industrial spur, bevel, herringbone, helical and worm gears, chain drives,
sprockets and most metal-on-metal systems requiring extreme-pressure additives.
These lubricants are excellent for use
in severe operating conditions and their synthetic properties make them good all-season lubricants.
