| |
Synthetic Ester Oil / Coolant for Rotary
Compressors and Vacuum Pumps - ISO 32/46 - View or Download
Air Compressors have very unique
suffering points and can be detrimental to a company's
efficiency if
not properly addressed. Compressors are typically very
noisy and, therefore, are frequently placed away from areas
of normal
daily activities of a
business. Because of remote locations, compressors are often "out of sight, out of mind." Low quality compressor oils
will cause blown seals and use excessive oil, reducing
the protection.
These problems can be overcome with Amsoil PC series compressor oils. Compressors are often
placed inside of compartments or small outbuildings
that, when constructed, do not take into account the airflow a compressor requires.
With little to no
ventilation taking place, compressors run very hot causing inferior oils to oxidize, increasing wear and causing drastically shortened oil
and equipment life. lf located in areas with poor
ventilation, compressor air intakes often reuse
hot air, causing major carbon deposits to form on
valves, this is called re-compression.
Equipment
Sufferinq Points - Lack Of Maintenance and
Neglect
Minimal oil changes - Usually hard
to get at location
Poor
Locations Due to noise - Enclosed area
Air
intake issues - Lack of fresh air
Valve
Deposits - Carbon buildup
Overheating
due to poor ventilation
Foaming
of oil - Shorter oil life
Amsoil
Solution
PCK will withstand higher Temperatures - Wider operating
temperature range Lower Carbon
buildup - Reduces Hotspots Extended Drain Intervals - Lasts 8
times longer- 50 % reduction in lube cost
- 8000 hour service life
or longer with oil analysis
- Heat and Oxidation resistant - Runs Cooler -
25 % increase in product output
- Improved Efficiency - Lowers
Energy Consumption -
6 % electric reduction
- Resists Water Contamination - Wont mix with water
- Reduces Wear - 25
% reduction in maintenance expenses
- Capital Expense reduced by 10 % Resulting in
15 % profit increase
|
|
